XW Series
The absence of brushes in a Brushless DC Motor is perhaps its greatest advantage. The carbon brushes within a Brush DC Motor eventually wear out and require replacement, which result in down time and cost. The Brushless DC Motor generates far less noise due to the elimination of brushes and commutator and sparking between them.
The Brushless DC Motor is typically smaller and lighter than the Brush DC Motor, making it ideal for applications where weight and space are important factors. The Brushless DC motor is cleaner, more powerful and requires lower maintenance than the Brush DC Motor. It has higher speed ranges, higher dynamic responses and ultimately outlasts the Brush DC Motor in total operating hours.
- 10w, 25w, 40w, 90w
- 電圧 単相100~120 VAC & 200~230 VAC , 50/60Hz
- ギヤ比は5,10,15,20,30,50,100,200 to 1を選択可能
- 最大トルク 260 in-lbs (ギヤヘッド付き)
- 速度制御範囲は100～2000rpm
- 小型 (最大 4.76 インチ、シャフトレス)、高トルク、モジュラーギヤヘッドシステム、速度安定性 (+/-1%) 過負荷保護、即時停止、低速運転および低速停止、多点速度設定
- UL/CSA/DEMKO 認定
| 1. BLDC Series | 2. Frame size | ||
| XWM | Standard BLDC Motor | 6 | 2.36″ sq. (60mm) |
| 8 | 3.15″ sq. (80mm) | ||
| 9 | 3.54″ sq. (90mm) | ||
| 3. Output | 4. Pinion Shaft | ||
| 10 | 10W | G | Gear Pinion |
| 25 | 25W | D | Flat(D-Vut) Pinion |
| 40 | 40W | ||
| 90 | 90W | ||
Motor Specifications
| Type | Gear Type (D-cut Type) | XWM610G/XWM610D | XWM825G/XWM825D | XWM940G/XWM940D | XWM990G/XWM990D | ||||
| Rated Output(continuos) W | 10 | 25 | 40 | 90 | |||||
| Power Input | Voltage V | 1Ø, 100~200 | 1Ø, 200~230 | 1Ø, 100~200 | 1Ø, 200~230 | 1Ø, 100~200 | 1Ø, 200~230 | 1Ø, 100~200 | 1Ø, 200~230 |
| Frequency | 50/60 | ||||||||
| Rated Input current A | 0.6 | 0.35 | 0.9 | 0.56 | 1 | 0.64 | 2 | 1.2 | |
| Maximum Input Current A | 0.8 | 0.5 | 1.2 | 0.8 | 1.3 | 0.9 | 2.6 | 1.6 | |
| Rated Torque | N-m (lb-in) | 0.05(0.43) | 0.125(1.08) | 0.20(1.73) | 0.45(3.9) | ||||
| Starting Torque | N-m (lb-in) | 0.06(0.52) | 0.25(1.3) | 0.24(2.08) | 0.54(4.68) | ||||
| Motor Permissible Load Inertia Moment |
J kg-m2 | 0.5X10-4(2.7) | 1.8×10-4(9.8) | 3.3×10-4(18.1) | 5.8×10-4(31.7) | ||||
| (oz-in2) | |||||||||
| Rated Speed | r/min | 2000 | |||||||
| Speed Control Range | r/min | 100 ~ 2,000 (Speed Ratio 1:20) |
|||||||
| Speed Regulation | Load | Less than ±1% (0 ~ rated speed) |
|||||||
| Voltage | Less than ±1% (supply voltage ±10%, at rated speed with no load |
||||||||
| Temperature | Less than ±1% (0 ~ +40°C (+32 ~+104°F), at rated speed with no load |
||||||||
XWD Driver
| 1. BLDC Driver Series | 2. Output | 3. Voltage | |||||
| XWD | Standard BLDC Driver | 10 | 10W | A | 1Ø 100~ 120VAC | ||
| 25 | 25W | B | 1Ø 200~230VAC | ||||
| 40 | 40W | ||||||
| 90 | 90W | ||||||
XTG Gearhead
| 1. BLDC Series | 2. Frame size | ||||
| XTG | Standard BLDC XWA Series Gearhead | 6 | 2.36″ sq. (60mm) | ||
| 8 | 3.15″ sq. (80mm) | ||||
| 9 | 3.54″ sq. (90mm) | ||||
| 3. Ratio – Reduction ratio | 4. Output | ||||
| 5 | 1/5 | 10 | 1/10 | K | Key type |
| 15 | 1/15 | 20 | 1/20 | ||
| 30 | 1/30 | 50 | 1/50 | ||
| 100 | 1/100 | 200 | 1/200 | ||
Permissible Torque with Gearhead
| N-m/(lb-in) | |||||||||
| Gearhead ratio | 5 | 10 | 15 | 20 | 30 | 50 | 100 | 200 | |
| Speed variable range | 20-400 | 10-200 | 6.7-133 | 5-100 | 3.3-67 | 2-40 | 1-20 | 0.5-10 | |
| Model | XWM610 | 0.22(1.91) | 0.45(3.91) | 6.8(5.90) | 0.90(7.81) | 1.3(11.28) | 2.1(18.23) | 4.2(36.45) | 6.0(52.08) |
| XWM825 | 0.56(4.86) | 1.12(9.72) | 1.8(14.58) | 2.2(19.09) | 3.2(27.77) | 5.3(46.00) | 10.6(92.00) | 16.0(138.87) | |
| XWM940 | 0.90(7.81) | 1.80(15.62) | 2.70(23.43) | 3.60(31.25) | 5.1(44.27) | 8.5(73.78) | 17.0(147.55) | 30.0(260.38) | |
| XWM990 | 2.10(17.36) | 4.10(34.72) | 6.00(52.08) | 8.00(69.44) | 11.5(99.44) | 19.3(167.51) | 30.0(260.38) | 30.0(260.38) | |